Kärcher NT 75/1 Tact Me Te H Manual Del Usuario página 13

Contents
General notes ......................................................
Environmental protection.....................................
Intended use........................................................
Description of the unit..........................................
Symbols on the device ........................................
Preparation ..........................................................
Initial startup ........................................................
Operation.............................................................
Transport .............................................................
Storage................................................................
Care and maintenance ........................................
Troubleshooting guide .........................................
Disposal...............................................................
Warranty ..............................................................
Accessories and spare parts ...............................
EU Declaration of Conformity ..............................
Technical data .....................................................
General notes
Read these original instructions and the
enclosed safety instructions before us-
ing the device for the first time. Act in ac-
cordance with them.
Keep both books for future reference or for future own-
ers.
● If the operating instructions and safety instructions
are not observed, the device can be damaged and
dangers could arise for users and other persons.
● Notify the dealer immediately in the case of shipping
damage.
● Check the package contents when unpacking for
missing accessories or for damage.
Environmental protection
The packing materials can be recycled. Please
dispose of packaging in accordance with the en-
vironmental regulations.
Electrical and electronic appliances contain valu-
able, recyclable materials and often components
such as batteries, rechargeable batteries or oil,
which - if handled or disposed of incorrectly - can
pose a potential threat to human health and the environ-
ment. However, these components are required for the
correct operation of the appliance. Appliances marked
by this symbol are not allowed to be disposed of togeth-
er with the household rubbish.
Notes on the content materials (REACH)
Current information on content materials can be found
at: www.kaercher.com/REACH
Intended use
● This vacuum cleaner is intended for the wet and dry
cleaning of floor and wall surfaces.
● This device is suitable for vacuuming dry, non-flam-
mable dusts that are harmful to health from ma-
chines and devices; dust class H as per EN 60335-
2-69.
● Industrial vacuums and portable dust removal devic-
es in accordance with Technical Rule 519 (TRGS
13
519) Appendix 7.1 may be used for the following ap-
13
plications:
13 1. In enclosed spaces, activities with low exposure
in accordance with TRGS 519 number 2.8 or small-
13
scale work in accordance with TRGS 519 No. 2.10.
14
2. Cleaning work. In the Federal Republic of Germa-
14
ny, the regulations in TRGS 519 (Technical Rules for
14
Hazardous Substances) apply to asbestos vacuum
15
cleaners.
16
● After using the asbestos vacuum cleaner in the
16
sealed-off area as per TRGS 519, the asbestos vac-
16 uum cleaner may no longer be used in the "white ar-
ea". Exceptions are only permitted if the asbestos
17
vacuum cleaner has been completely decontami-
17
nated beforehand by a specialist in accordance with
17
TRGS 519 No. 2.7 ("completely" means not only the
17
case, but also e.g. the cooling chamber, installation
17
spaces for electrical equipment, the operating
18
equipment itself, etc.). This is to be recorded in writ-
ing and signed by the technical expert.
● This device is suitable for commercial use, e.g. in
hotels, schools, hospitals, factories, shops, offices,
and rental companies.
Description of the unit
Illustration A
Electrodes
1
Suction hose
2
Push handle, adjustable
3
Suction head lock
4
Dirt receptacle
5
Suction head
6
Steering roller
7
Suction hose port
8
Chassis handle
9
Floor nozzle
10
Chassis
11
Plug
12
Suction pipe
13
Carrying handle
14
Hose and cable hooks
15
Filter cover
16
Hose cross-section scale
17
Angle piece
18
Hose cross section turn switch
19
Turn switch for suction power (min-max)
20
Control lamp
21
Socket
22
Turn switch
23
Rest for floor nozzle
24
Tilting aid
25
English 13