Technical Specifications - Velleman PROMIX50S Manual Del Usuario

9 - HEADPHONE INPUT JACK
Stereo input jack for headphones (∅ 6.35 mm). Verify if the rotary is under 5 before connecting. The output power is
150 mW/8 Ω.
10 - HEADPHONE LEVEL
Used for adjusting the level of the phone's output signal.
D. BACK PANEL
11 - MASTER OUTPUTS
These unbalanced cinch outputs can be connected to any power amplifier. The output voltage suffices to drive any power
amplifier.
12 - GROUND CONNECTOR
To connect 1 or 2 turntables to the ground connectors.
13 - INPUT CONNECTORS
These RCA connectors can be connected to the 3 CD/LINE and the 2 PHONOS. The jacks should be connected to
microphones.
14 - AC INPUT CONNECTOR
AC input connector for the PSU.

5. Technical specifications

inputs
MIKE (DJ)
PHONO (CH1 – CH2)
CD LINE (CH1 – CH3)
output (MASTER)
harmonic distortion
frequency response
S/N ratio
MIKE (DJ)
PHONO
CD LINE
phones
voice-over
power supply
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage
or injury resulted from (incorrect) use of this device. For more info concerning this product and the latest
version of this manual, please visit our website www.hqpower.eu. The information in this manual is subject to
change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual or may be copied, reproduced, translated or reduced to any electronic medium or otherwise without
the prior written consent of the copyright holder.
25.02.2010
PROMIX50S
1 mV/1k Ω
3 mV/50k Ω (RIAA)
150 mV/100k Ω
1.5 V/600 Ω (nom.)
0.02 % (@ nom. output level)
20 Hz ~ 20k Hz ± 0.5 dB (RIAA ± 2 dB)
70 dB
70 dB
80 dB
max. 200 mW/8 Ω
-14 dB max. @ 1k Hz
12 VAC/300 mA PSU (incl.)
232 x 120 x 32 mm
750 g
4
Rev. 01
©Velleman nv