cecotec BIGDRY 9000 PROFESSIONAL CONNECTED Serie Manual De Instrucciones página 31

ENGLISH
2. BEFORE USE
Take the product out of the box.
Remove all packaging material. Save the original box.
Make sure all parts and components are included and in good conditions. If any visible signs of
damage are observed, contact the Technical Support Service immediately.
When installing the device, ensure a minimum safety distance of 20 cm to each of its sides.
Fig. 4
3. OPERATION
On/off
The device will beep when it is turned on, and the LED will display the room humidity level for
3 seconds. Then, the display will turn automatically off.
Press the On/Off button to start operation. Press again for it to stop working.
Lock
Press the power button for 3-5 seconds to activate the child lock system. Press and hold it
again for 3-5 seconds to deactivate it.
Dehumidification speed
Press the fan button to activate the fan function. Press the same button to select high or low
speed. The fan indicator will light up.
The fan's speed can be adjusted during the Dry mode. When humidity level is 55 % or over, the
speed will automatically operate at high speed.
When humidity level is under 50 %, the fan will automatically operate at low speed.
When humidity level is 50-55 %, then fan speed will switch between high/low speed
automatically.
Humidity settings
Press the settings button to adjust humidity level.
The default humidity in dehumidifying mode is 40 %.
Press the settings button to adjust humidity from 40 % to 80 %, in 5-% interval. The display
will show the selected setting.
The device will automatically stop operating when the room humidity is -2 %, and will start
operating again automatically after 3 minutes.
If after 3 minutes, the room humidity level is still below the set one, the device will automatically
turn off.
Humidity cannot be adjusted in dry mode. The humidity level by default is 30 %.
31
BIGDRY 9000 PROFESSIONAL/BLACK CONNECTED