EGAmaster EGAtronik Manual De Instrucciones página 22

Range
Range
2.000nF
20.00nF
200.0nF
2.000µF
20.00µF
200.0µF
2.000mF
- Overload protection: 600Vrms(AC/DC).
- Tested capacitance 200nF, adapt REL mode.
Range
200.0µA
2000µA
20.00mA
200.0mA
2.000A
10.00A
- Input current> 10A , "OL" symbol appears and buzzer beeps
- Overload protection 250Vrms
µA mArange, F1 Fuse 0.2A/250V
10A range: F2 Fuse 10A/250V
22
CONTINUITY, DIODE
Resolution
lf the measured resistance is greater than 50Ω, the
measured circuit will be regarded as in open status,
0.1Ω
than 10Ω, the measured circuit will be regarded as
in good conduction status, and the buzzer goes off.
Open circuit voltage: 2.1V, test current is about 1mA
0.001V
CAPACITANCE
Resolution
0.001nF
0.01nF
0.001µF
0.01µF
0.1µF
0.001mF
DC CURRENT
Resolution
0.1µA
0.01mA
0.1mA
0.001A
0.01A
Accuracy
and the buzzer does not go off.
lf the measured resistance is less
Silicon PN junction voltage is
about 0.5~0.8V.
0.1nF
1µA
Φ
5x20mm.
Φ
5x20mm.
Accuracy
Under REL mode± (5%+5
± (4%+8)
± (4%+8)
± (4%+8)
± (4%+8)
± (4%+8)
± (10%)
Accuracy
± (1.0%+2)
± (1.0%+2)
± (1.0%+2)
± (1.0%+2)
± (1.2%+5)
± (1.2%+5)
)