Intimus AutoShred 180 CP4 Instrucciones De Uso página 13

GB
ƒ Do not attempt to service this product
yourself as doing so may expose you to
sharp cutting blades and/or electricity and
will void the manufacturer's warranty.
ƒ Never try to clean or clear the shredder
blade.
ƒ Never shred beyond the specified sheet
capacity. This may result in extensive dma-
ge to the machine.
2 Installation
1. Make sure basket door is shut and secure-
ly closed. The safety power cut off will not
operate if door is open. Shredders with
pull-out wastebaskets will also cut power
upon bin removal. The supplied waste-
basket activates a safety switch, which all-
ows the shredder to be operable. (Fig. 1).
2. The socket-outlet should be near the
equipment and easily accessed.
3. Connect the power cord to any standard
230-V AC outlet.
Fig. 1 Close door for operating
96414 1 12/21
3 Operation
3 .1 Part overview
Fig. 2 Part Overview
3 .2 Operating elements
Main Power Switch (at back of machine)
000526
The Main Power Switch (Fig. 2/4) must be "ON"
to operate. In an emergency, stop the shred-
der immediately and turn switch to "OFF"
mode. This completely disconnects all power
to the machine.
4
3
2
1
1 Pullout bin
2 Control panel
3 Push button to open the lid
4 Main power On/Off switch (at back of
machine)
5 Manual-feed slot
6 Paper tray viewing window
7 Casters
5
6
7
000527
13