Publicidad
Idiomas disponibles
Idiomas disponibles
Repeat Step 1 and 2 for the left arm (D).
3.
Hardware Used
Short Bolt
AA
Long Bolt
BB
Steel Washer
CC
Connecting Clip
EE
4. Insert legs (E) into seat frame (A).
5. Attach back frame (B) to seat frame (A) using
blue long bolts (FF), spring washers (GG), thin
plastic washers (HH) and plastic washers (II)
Note: Hand tighten only.
Check alignment of all hardware, and make
any necessary corrections. Then, fasten all bolts
tightly with hex wrench (JJ) and cover with
bolt covers (DD).
Hardware Used
Blue Long Bolt
FF
Spring Washer
GG
Thin Plastic Washer
HH
Plastic Washer
II
Bolt Covers
DD
Hex Wrench
JJ
CARE AND MAINTENANCE
• Clean frame with a solution of warm water and mild soap. Dry completely. Do not use bleach
or solvents. Use a fine automotive wax to maintain gloss on non-textured finishes.
• The finish on furniture is formulated and baked on to make it highly resistant to repellents and
lotions. However, to avoid discoloration, clean the frame as soon as possible after exposure.
3
x 2
x 1
x 3
x 1
4
5
x 2
B
II
A
x 2
x 2
x 2
x 8
Make sure the back adjustment bar rests
x 1
on the back of the seat frame for easier assembly.
4
Lowes.com/gardentreasures
A
HH
GG
FF
DD
E
Publicidad
