Monster Q-Rax Manual Del Usuario página 5

25241 Q-RAX WORKBENCH BLACK
SAFETY ADVICE
SAFE WORKING PRACTICE
Please read through the Safe Working Practice to ensure prevention of injury or
damage to the device.
Do not use the Q-Rax Workbench in areas of high temperature or humidity as the MDF
boards are untreated and may warp or become uneven.
Do not use corrosive cleaning equipment when cleaning your workbench, as this may
strip the paint.
Do not exceed the weight capacities of 200kg distributed evenly across the bench.
Always keep the weight evenly distributed to avoid damage to the rack or MDF and to
prevent the rack from falling over.
Be careful when using a hammer to assemble.
Ensure that each beam is properly hammered into place before continuing with the
assembly process.
Be sure that each MDF board is slotted into the shelf correctly before you store items on
the racking.
Ensure the moulded feet are attached correctly to prevent any potential injury.
Treat the MDF boards with varnish or mould prevention products if using in a humid
environment.
05