Publicidad
SETUP
CONNECTION MODES
INITIALIZATION
1
Turn on your Stratus+ by pressing and holding the Home Button (6) .
2
All four Player Indicator LEDs (3) will flash to indicate your
SteelSeries Stratus+ is in pairing mode .
3
To pair your Stratus+ to your Android device, go to Settings →
Bluetooth . "Stratus+" will be displayed on the screen . Tap to Connect .
SWITCHING BETWEEN WIRELESS AND WIRED MODE
The Stratus+ has an auto-detect feature to go into wired or wireless mode
when first searching for a connection . But if you are already connected
wired or wirelessly and want to switch to the other mode, follow these
steps:
If the Stratus+ is wirelessly connected and you want to switch to wired
mode:
1
Use the USB-A to USB-C Play and Charge Cable (14) to connect
the controller to the device you want to connect to in wired mode .
2
Simultaneously press and hold down the Back/Select Button (2) and
the Forward/Start Button (4) for 2 seconds .
3
The LED pattern change will indicate that the controller switched from
wireless to wired mode .
If the Stratus+ is connected via wired USB-C to another device and you
want to switch to wireless mode:
6
Play & Charge
Windows
Android
Publicidad
