Publicidad
1
While the controller is on and connected to another device,
simultaneously press and hold down the Back/Select Button (2) and
the Forward/Start Button (4) for 2 seconds .
2
The LED pattern change will indicate that the controller switched from
wired mode to wireless search mode .
PAIRING TO A NEW DEVICE
1
Press the Wireless Pairing Button (9) for 3 seconds .
2
All four Player Indicator LEDs (3) will flash to indicate that your
Stratus+ is in pairing mode .
3
Open the Bluetooth menu on your mobile device and make sure it is
scanning for available devices . Find "SteelSeries Stratus+" and press
to connect .
RECONNECTING TO AN EXISTING DEVICE
1
Turn on your Stratus+ by pressing and holding the Home Button (6) .
2
During the connecting sequence, the Player Indicator LEDs (3) will
cycle from 1 to 4 . The Stratus+ will automatically reconnect to the
most recent device when powered on .
3
If the Stratus+ doesn't automatically connect to the device, open up
the Bluetooth menu on the desired device and find the "SteelSeries
Stratus+" in available devices . Press to connect .
Note: If you want to connect to a previously paired device, simply select
the Stratus+ from the Bluetooth menu on the Android device .
More detailed product information at
steelseries .com/stratus-plus
7
Publicidad
