Publicidad
Idiomas disponibles
Idiomas disponibles
GB
1 Motor housing
2 Carrying handle
7 Waste container
8 4 Accessory holders
9 4 feet with castors
14 3-part vacuum tube
15 Suction hose with handle
17 Foam filter
18 Material filter
19 Paper filter bag
20 Floor nozzle
21 Crevice nozzle
- 2 Phillips screws for carrying
handle
- 4 Phillips screws for accessory
holders
- Instruction Manual
Overview
Housing
1 Motor housing
2 Carrying handle
3 On/off switch
4 2 attachment ports for
accessories
5 Blower connection
6 2 locking clips
7 Waste container
8 4 accessory holders
9 4 feet with castors
10 Mains cable
11 Power cable holder
12 Suction connection
13 Drainage outlet
Accessories
14 3-part vacuum tube
15 Suction hose with
16 Handle component
Filter
17 Foam filter for wet vacuuming
18 Material filter for dry vacuuming
16
19 Paper filter bag to vacuum
coarse dirt
Nozzles
20 Floor nozzle with brush and rub-
ber lip, for vacuuming carpets
and smooth surfaces
21 Crevice nozzle
22 Filter basket
23 Flaps on the paper filter bag
24 Intake connections
25 Sealing ring
26 Lip on the suction pipe
Functional description
The wet and dry vacuum cleaner is
equipped with a robust plastic container
for waste collection. The castors make the
appliance very easy to manoeuvre. The
suction flow is switched off by a float dur-
ing wet vacuuming once the waste tank is
full. The appliance is also equipped with a
blower function.
The following describes the function of the
operating parts.
Pictograms regarding the use
of nozzles and filters
Nozzle to vacuum carpets
Nozzle to vacuum smooth surfaces
and hard floor surfaces
Nozzle to vacuum dust and dirt
from joints and cracks
Filter to absorb liquids
Filter not suitable to absorb liquids
Publicidad
