Publicidad
Idiomas disponibles
Idiomas disponibles
·
Set time/date, summertime/wintertime and
holiday period
»
Programming
A program consists of an ON time, OFF time and associated
ON and OFF days.
Programs with predefined on/off days (Mon to Sun, Mon to Fri
and Sat and Sun): for these programs, you only need to set
the switching times.
With the "INDIVIDUAL" option, you can allocate switching times to
specific days of your choice.
The programs of a channel are linked to one another
by logical OR.
*
*
C HRONO = All switch commands are executed in chronological order in a week
INPUT = Programs are executed in the order in which they are entered
Modes
•
Auto - Automatic operation
•
Constant ON
•
Constant OFF
•
Extra
The switch status imposed by the
program is inverted (manual override).
With the next effective switch
command, the time switch resumes
control of on/off switching.
Holiday
After activation, the holiday program is executed between 0:00h on the start date and 24:00h on the end date
(Constant ON/OFF). After the holiday program has run once, it must be reactivated.
Reset
Warning!
The memory will be cleared,
and all set data will be lost.
Hold down all keys simultaneously for about
2 seconds and release.
The language, time, date, summertime/wintertime
and switching times will have to be re-entered.
Additional function descriptions are provided on the attached sheet.
Summertime: ± 1 hour
Europe: Factory set.
SPECIAL: The switchover to/from
summertime can be freely programmed
by entering a start date and end date
and is then executed each year on the
same day of the week, e.g. Sunday.
Set MON and TUES
as on/off days
MENU
OK
Publicidad
