Publicidad
Idiomas disponibles
Idiomas disponibles
SP6683 DIRT HOUND.qxd
!
WARNING: For your own safety,
never connect plug to power source
outlet until all assembly steps are
complete and you have read and
understood the safety and operation
instructions. Do not operate vac with
any parts damaged or missing.
!
WARNING:
amputation or laceration, do not
operate vac with filter cage/float
missing.
1. Place the power assembly of vac upside
down into the drum.
2. Locate the float. Place the float over the
opening in the center of the lid with the
words "This Side Towards Lid" laying
face down over the hole.
!
WARNING: To reduce the risk of
personal injury or damage to vac, be
sure to keep hands, fingers, or any
other foreign objects out of the
center opening when assembling
the float.
3. Line up filter cage tabs with the slots in
the center ring of the lid.
1. Carefully slide the filter over the filter
cage, sliding it over the center ring
covering the 3 slots until the filter stops
against the lid.
2. Place the hole in the filter plate over
threaded stud of the filter cage.
3. Gently push on the filter plate to seat the
rubber ring of the filter inside the circular
channel of the filter plate.
4. Place filter nut onto threaded stud and
tighten it down. Finger tighten only.
NOTE: Lever of filter nut should be away
from plate as shown.
IMPORTANT: Do not overtighten as this
may deform or crack the filter plate, filter
cage, or filter.
6/27/07
1:49 PM
Float/Cage Assembly
To
avoid
finger
Filter Assembly
Page 5
4. Push on the filter cage until the tabs
snap into the slots for a secure fit.
NOTE: If filter cage needs to be removed,
or replaced, use a flat blade screwdriver
and insert the blade near one of the tabs
between the filter cage and the center ring
of the lid. Pry the tab out of the slot. Tilt the
cage and lift away from the lid. To replace,
follow Float/Cage Assembly Instructions.
Filter Cage
Tabs (3)
Float
Solid End
THIS SIDE
TOWARD LID
Filter Cage
Tabs (3)
Slots (3)
Filter Nut
Lever
Slots (3)
5
Power Head
Assembly
Slots (3)
Filter Nut
Filter Plate
Filter
Threaded Stud
Filter Cage
Publicidad
