Dirt Hound DH12000 Manual Del Usuario página 7

SP6683 DIRT HOUND.qxd
Wet/Dry Vac Assembly (Continued)
6. Insert the push button end of the locking
hose into the inlet of the vac. The hose
should snap into place. To remove the
hose from the vac, press the release
button in the hose assembly and pull the
hose out of the vac inlet, as shown.
7. Place the utility nozzle or other
accessories securely on the opposite
end of the hose and the vac is ready
for use.
Cord Wrap
Area
Blowing Port
Lid Handle
Dust Drum
1. Slide the extension handles and the
accessories into the slotted areas of the
caster feet for storage.
2. To remove the accessories, lightly rotate
and pull upward.
6/27/07 1:49 PM
Storing Your Accessories
Page 7
Release
Button
On-Off Switch
Vacuum Port
Release Button
Drain
7
Press and
Pull
Swivel End
Utility Nozzle