Kohler K-377 Guia De Instalacion página 3

Apply plumbers putty.
Sink
Washer
Nut
Handspray Hose
1. Spout/Handspray Installation
Apply a bead of plumbers putty or other sealant to the underside
of the spout base according to the manufacturer's instructions.
Thread the nut and washer to the bottom of the shank.
Insert the shank from the bottom of the sink.
Thread the spout to the bottom of the shank, then loosen the
spout 1/8 of a turn.
Tighten the nut and washer to secure the shank to the sink.
Slide the provided gasket to the spray holder.
Slide the spray holder through the mounting hole from above.
Securely hand tighten the nut to the shank from under the sink.
Insert the handspray hose through the spray holder.
Attach the hose to the shank tee using thread sealant.
Kohler Co.
Handspray
Spout
Spray Holder
Gasket
Mounting Hole
Nut
Spout
Base
Shank
Shank Tee
3 1015074-2-B