FRICON VWD 108 C Manual De Uso Y Mantenimiento página 37

Eutectic Refrigerators and Freezers
NOTES:
• Do not use abrasive materials or mops as they will definitively damage the
appliance's surface.
• Do not remove fixed parts for cleaning. If necessary, they must be cleaned
by qualified personnel.
Replacing Components:
LED Replacement (when applicable):
• Before replacing the LED, disconnect the appliance from the electrical power
source;
• Remove the LED's protective casing;
• Remove the LED for replacement;
• Replace with a LED which has the same technical characteristics;
If any other component is damaged, it must be replaced by an individual qualified
for this task.
Periodic Maintenance:
This equipment uses carbon filtering to prevent bad odors from penetrating its
interior. This filter must be replaced once a year, or twice a year if the appliance
is in a very humid location.
9.Problem Resolution Guide
The Equipment Does Not Operate
• Check if there is an electric current.
• Check if the plug is properly inserted in the source outlet and if the voltage
and frequency are appropriate for operation.
Temperature is Unsatisfactory
• Check if the equipment has been connected long enough to have reached
operable temperature.
• Check if the appliance is not near heat sources.
• Check if the door is properly closed.
• Check the temperature regulation.
37
English