3E-490044NU – 03/20
There are 2 possibilities:
- Manual cleaning (on demand)
- Auto cleaning (cleaning programmed every day of the week):
16.1
« MANUAL » CLEANING (on demand):
Procedure:
- Switch the oven on.
- Wait a few seconds until the start screen clears. If the preheat starts press STOP.
- Select the Service screen then touch:
- Select the required level of cleaning depending on how dirty the oven is.
- Check the pipes are connected to the chemical containers and that the quantities are sufficient. If not refer to the paragraph
"Replacing the chemical containers"
- Press to select:
- Press to select:
- The screen indicates the different phases selected for the cycle, the running time and remaining time. When the cleaning cycle has
finished the Service screen is displayed again.
16 CLEANING MENU
The cavity should never be cleaned with grills or
containers in situ.
Intensity of the cleaning: Light / Medium / Intensive (The durations are shown on the left)
Priming function: When replacing a container, if the supply pipe is empty, select this
function ensures the dosage volume will be sufficient to ensure efficient results
"Cleaning"
"Cleaning level" Light, medium or intensive.
The time for each is indicated on the left.
"Back".
"Start" a cleaning cycle.
Page 5
EN
ELRO-Werke AG
Wohlerstrasse 47
5620 Bremgarten