LUCCI Air KILO Instrucciones página 5

Volume Air Purifier Instructions
1) Touch the power button to turn on the appliance. The power indicator and the lowest wind speed
indicator will be on.
2) Touch the power button again. The appliance will turn off, and all indicators will be off.
NOTE: The appliance will memorise the working modes when turning off without unplugging
from the mains power.
1) Once the power is turned on, press the timer button to set the 2H, 4H, and 8H timer in sequence.
The relevant indicator will be on.
2) Press the timmer button for the fourth time, and the appliance will exit the timer mode and operate
continuously.
1) Once the power is turned on, press the wind speed button to set the Low/Medium/High wind speed
in sequence. The relevant indicator will be on.
NOTE: During sleep mode, all indicators/lights will turn off after 5 seconds of no operation.
Press the night light button during the standby mode. The night light ring will turn on and cycle in
1)
the blue-cyan-green-yellow-orange-red-purple sequence. Press the button once more to hold the
current state.
Press the night light button again to turn off.
2)
When the appliance reaches 2200-hour operation time, the night light ring will flash in red, which means the
filter requires replacing, once the filter has been replaced, press and hold the power button for about 7
seconds to reset the reminder.
NOTE: It is not required to be reset when using the appliance for the first time.
5 | P a g e
OPERATION DIRECTION
Fig. 2