Publicidad
Idiomas disponibles
Idiomas disponibles
Before performing cleaning and maintenance work, switch
the appliance off and unplug the power cord.
When the filter is dirty, the suction power decreases
considerably. Clean the filter regularly to increase its
efficiency and extend the vacuum cleaner service life. Never
operate the vacuum cleaner without a filter installed.
The "ON/OFF" switch is protected by a waterproof cover. If
the cover is damaged, replace it with a new one.
1. Undo the fastening latches (11) and remove the
vacuum cleaner head (10);
2. Unscrew the filter fixing accessory, counter clockwise;
3. Remove the filter, rinse with water until clean and let it
dry;
4. Refit the filter and assemble the other components in
the reverse order of disassembly. The filter must be
placed dry.
Cleaning
After each use, clean all the components of the wet and dry
vacuum cleaner. Clean the vacuum cleaner with a clean,
damp cloth blow it out with compressed air at low pressure.
Careful handling protects the power tool and extends its
service life.
Cleaning and storage
Store the vacuum cleaner in its original packaging in a
clean, dry place out of children's reach.
The ideal storage temperature is between 5 and 30˚ C.
Store the cleaner in its original packaging.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your household
waste!
According to the European Directive 2012/19 /EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
intended for this purpose.
You can get information regarding the disposal of the power
tool through the person in charge for recycling in your city.
Tel.:
+351 256 248 826
E-mail:
international@centrallobao.pt
Website:
www.centrallobao.pt
Publicidad
