ENGLISH
Trimmer blades do not move:
•
The cutting unit may be dirty and clogged.
•
Clean and lubricate the unit.
BATTERY REMOVAL
•
The battery must be removed from the appliance before it is scrapped.
•
The appliance must be disconnected from the mains supply when removing
the battery.
•
Turn the trimmer on and discharge all remaining power.
•
Remove the comb and cutter assembly.
•
Use a screwdriver to pry out the holder plate under the trimmer carefully.
•
Use a screwdriver to pry the two side panels carefully.
•
Remove the 4 screws from the housing.
•
Using a screwdriver carefully pry apart the top and bottom housing.
•
Unscrew the 2 screws on the circuit board.
•
Remove the upper circuit board.
•
Disconnect the battery from the low circuit board.
•
The battery is to be disposed of safely.
RECYCLING
W
8
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-
rechargeable batteries marked with one of these symbols must
not be disposed of with unsorted municipal waste. Always
dispose of electrical and electronic products and, where
applicable, rechargeable and non-rechargeable batteries, at an
appropriate official recycling/collection point.