1
2
USING YOUR APPLIANCE
Before using the appliance for the rst time, peel o any promotional materials
and packaging materials, and check that the cooking plates are clean and free
of dust. If necessary, wipe over with a damp cloth. For best results, pour a
teaspoon of vegetable oil onto the non-stick plates. Spread over with an absor-
bent kitchen towel and wipe o any excess oil.
When your appliance is heated for the rst time, it may emit slight smoke or
odor. This is normal with many heating appliances. This does not a ect the
safety of your appliance.
• Set the Temperature Control to your desired setting: "Low" for light-colored
food and "High" for darker food. At rst, try a setting in the max. You may later
adjust it lower or higher according to your preference.
• Inset the pin plug into the power outlet, you will notice that the power indica-
tor will go on, indicating that the appliance has begun preheating.
• Allow your appliance to pre-heat until the ready indicator goes o . This indi-
cates that the cooking plates have reached the correct temperature for cook-
ing.
• For best results, lightly spray the cooking plates with a cooking oil spray
before using it. This will assist in the removal of the Wa es after cooking.
• Divide mixture into pan holes as per recipes using a jug & spoon or fabric
piping bag.
Note: Do not use disposable plastic piping bags as these may melt if they come
into contact with hot plates.
3 45
7
1.Handle
2.Non-stick Plate
6
3.Knob
4.Power Light (Red)
5.Ready Light (Green)
6.Upper Housing
7.Bottom Housing
EN