Publicidad
Idiomas disponibles
Idiomas disponibles
3. Stand Installation
EN
In the process of assembling/disassembling the base of the bracket, the display screen cannot be left under the polyol
foam to prevent the screen from being broken.
3.1 Bracket installation
Open the packing box, take out the bracket and the base, use 2 screws to pass through the base to lock the bracket
1
and paste the foot pads, and then clip it into the cable harness seat.
Take the machine out of the box, lay it flat, with the back facing up, snap the stand into the monitor, and push the
2
quick release button to complete the stand removal.
10
Screws
Foor Pad
Quick release button
Harness Seat
Publicidad
