PcCom Discovery 27 GO2780 Manual Del Usuario página 9

2. Product Overview
2.1 Monitor Buttons
M Menu Button
1
Down Button
2
Up Button
3
E Exit Button
4
Power Button
5
LED Indicator
6
2.2 Monintor Ports
Connect the signal line to output interfaces signal of DP/HDMI signals of PC, and then connect the other end of
the signal line to the corresponding signal input port of the display.
DC HDMI2
7 8
Power Connector
7
HDMI Connectors
8
DP Connectors
9
Audio Output
10
Press to display the OSD menu or enter sub-menus.
Press to move down in the menus.
Press to move up in the menus.
Press to exit.
Press to turn the monitor on/off.
Changes colour according to status.
HDMI1 DP AUDIO
OUT
9 10
Insert the power cable to supply power to the monitor.
Insert one end of the HDMl cable into the computer's HDMI
output and connect the other end to the monitor's HDMl port.
Insert one end of the DP cable into the computer's DP output
and connect the other end to the monitor's DP port.
Plug one end of the audio cable into the audio output interface,
and connect the speaker to receive the audio signal from the
monitor.
1 2 3 4 5 6
EN
9