Bosch Professional GWX 180-LI Manual Original página 9

Additional safety information
Wear safety goggles.
Use suitable detectors to determine if there are hid-
u
den supply lines or contact the local utility company
for assistance. Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
Do not touch grinding and cutting discs until they have
u
cooled down. The discs can become very hot while work-
ing.
Release the On/Off switch and set it to the Off posi-
u
tion when the power supply is interrupted, e.g. when
the battery pack is removed. This prevents uncontrolled
restarting.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for cutting, roughing and brush-
ing metal and stone materials, as well as making holes in
stone materials using diamond core cutters, without the use
of water.
A separate protective guard for cutting must be used when
cutting with bonded abrasives.
Bosch Power Tools
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind concrete.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Unlocking lever for protective guard
(2) Direction of rotation arrow on housing
(3) Lever
(4) On/off switch
a)
(5) Rechargeable battery
a)
(6) Battery release button
(7) Auxiliary handle (insulated gripping surface)
(8) Protective guard for grinding
(9) X-LOCK grinding disc/flap disc
(10) Protective guard for cutting
a)
(11) X-LOCK cutting disc
(12) Handle (insulated gripping surface)
(13) X-LOCK holder
a)
(14) Hand guard
(15) X-LOCK backing pad for fibre discs
a)
(16) X-LOCK fibre disc
(17) X-LOCK clip for fibre discs
(18) X-LOCK cup brush/disc brush
(19) X-LOCK diamond annular cutter
(20) Extraction guard for cutting with cutting guides
(21) X-LOCK diamond cutting disc
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Angle grinder
Article number
Rated voltage
A)
Rated speed
Max. grinding disc diameter
Restart protection
Run-out brake
Soft start
Weight according to EPTA-Procedure 01:2014
– with low-vibration auxiliary
handle
– with standard auxiliary
handle
English | 9
a)
a)
a)
a)
a)
a)
a)
a)
GWX 180-LI
3 601 JH9 1..
V= 18
-1
min 11.000
mm 125
●
–
●
B)
kg 2.4–3.2
kg 2.3–3.0
1 609 92A 6CZ | (14.07.2021)