Publicidad
Idiomas disponibles
Idiomas disponibles
5.
Start playback with the external playback device.
EN
6.
You control the playback and basic volume with the external playback device.
Notes:
•
Bluetooth works best within 10 meters outdoors.
•
The device connects to the last connected device.
•
The basic volume is specified by your external device. You can use the volume control on the device to adjust
the volume.
5.7
Phone mode
1.
Turn the [Function controller] knob to Phono to select the turntable function.
2.
The Power LED lights up red.
3.
Select the speed based on your record. (33/45/78 rpm.)
4.
Place a record on the turntable.
5.
Lift the tone-arm using the tone-arm lever.
6.
Move the tone-arm over the record.
7.
The turntable starts to turn.
8.
Lower the tone-arm using the tone-arm lever.
9.
Playback begins.
Auto stop
•
On: The turntable stops automatically.
•
Off: The turntable does not stop automatically.
Notes:
•
Before playback, check that all transport stickers have been removed and that the protective cap has been
removed from the clay needle.
•
The tone-arm does not automatically return to the zero position after playback.
5.8
Aux in mode
1.
Turn the [Function controller] knob to AUX IN to select the AUX IN function.
2.
The LED lights up purple
3.
Use a 3.5mm AUX cable to connect the device to an external playback device.
4.
You control the playback with the externally connected playback device.
5.9
Recording function
5.9.1
Phono recording
1.
Insert a USB stick into the [USB / REC] socket.
2.
Start the playback.
3.
Press the [STOP / REC] button to start recording.
4.
The Power LED flashes red.
5.
To save the recording, press the [USB / REC] button again.
6.
The Power LED now lights up red and the recording is saved.
5.9.2
Aux In recording
1.
Insert a USB stick into the [USB / REC] socket.
2.
Start the Aux In playback.
3.
Press the [STOP / REC] button to start recording.
4.
The Power LED flashes purple.
5.
To save the recording, press the [USB / REC] button again.
6.
The Power LED now lights up purple and the recording is saved.
Note:
•
The recording speed is 1:1.
•
No song title information is recorded.
•
To avoid damage to the USB stick, only pull out the USB stick when the device is switched off.
6. MAINTENANCE AND CLEANING
This turntable requires little or no regular maintenance. Remove dust with a slightly moistened antistatic cloth.
IMPORTANT: Never use a dry cloth as it will create static electricity which attracts even more dust!
Antistatic cleaning fluids are available at specialized stores but must be applied sparingly to avoid damage to
rubber parts. It is recommended to fit the needle cover before cleaning or maintenance to avoid damage.
If the turntable is not used over a long period of time, the drive belt should be removed to prevent unequal
stretching.
8
Publicidad
