Orbegozo CR 4000 Manual De Instrucciones página 12

CR 4000
• Important! Do not insert any foreign objects into the
appliance openings! Risk of injury (electric shock) and
damage to the appliance!
• Keep the mains cord at a safe distance from the air
inlet and outlet grilles.
HOW TO USE THE HEATER
1. Connect the appliance to the socket
2. Press the ON / OFF button to turn it on
3. Press the - / + buttons to select the desired temperature.
4. With the MENU button you can select one of the two speeds by pressing - / + (LL low speed, HH
high speed) available to the device.
5. By pressing the MENU button again, you can set the timer up to 12 hours with -/+ buttons
6. The temperature of the thermostat ranges between 15-32ºC.
To prevent damage and risks due to overheating, the built-in overheating safety device cuts off the
power as soon as the heating elements become too hot. If this should happen:
First ensure that it was not the thermostat which has switched off the heater. Set the thermostat to
maximum position. If the heater does not switch on, the safety device has been activated.
Remove the mains plug from the wall socket.
-
Let the heater cool down for 30 minutes.
-
Check if the heater had been placed correctly.
-
Check if anything is obstructing the air flow.
-
All manuals and user guides at all-guides.com
12