Orbegozo CR 4000 Manual De Instrucciones página 13

CR 4000
If necessary, clean the grilles with a vacuum cleaner.
-
Replace the plug into the wall socket and switch the heater on again.
-
If the safety device again switches off the heater:
Remove the mains plug from the wall socket.
-
Have the heater inspected by a Service Centre or by your dealer.
-
CLEANING
We recommend that you clean your heater at least twice a year to remove accumulated dust and dirt.
Remove the mains plug from the wall socket.
-
Wait for the heater to cool down sufficiently.
-
You may clean the outside of the heater with a damp cloth or brush. Do not use water or allow
-
water to come into the appliance. Do not use any abrasive and caustic cleaning agents!
Never touch the heater in water!
-
Clean the air inlet and outlet grilles regularly with a vacuum cleaner, using the brush attachment.
-
STORAGE
Keep the original box in which the heater was packed to store it during the warmer months when it is
not in use. Clean the heater according to the instructions. Pack the heater in the original box and store
it in a cool, dry place.
This product is only suitable for well insulated spaces or occasional use
Item Symbol Value
Heat output
Nomin P 0.6
nom
al heat
output
Minim P 0
min
um
heat
output
(indica
tive)
Maxim 1.2 0.6
um
contin
uous
heat
output
Auxiliary electricity
consumption
All manuals and user guides at all-guides.com
Unit Item
Type of heat input, for electric storage local space heaters
only (select one)
KW manual heat charge control, with integrated
thermostat
KW manual heat charge control with room and/or
outdoor temperature feedback
KW electronic heat charge control with room and/or
outdoor temperature feedback
Auxiliary electricity consumption
Unit
no
no
no
no
13