Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Place the Hot Pot on a sturdy flat and dry surface.
2.
Insert the power cord firmly into the socket and make sure it is securely in place.
3.
Plug the Hot Pot into the nearest Electric Outlet.
4.
Turn on temperature control switch to the desired setting.
CAUTION: Do not overfill the appliance above the 'MAX' line.
5.
Add your ingredients to the Hot Pot and gently stir using only plastic or wood
utensils during cooking, as metal can scratch and damage the stainless steel.
6.
Once cooking is completed, turn the Temperature Control Switch to 'O' for Off,
unplug the appliance and disconnect the power cord from the Hot Pot.
7.
Let stand and cool before cleaning (15 minutes).
Common Usage:
Boiling Water
1.
Remove glass lid, add water lower than the 'MAX' level. Then cover with glass lid.
Insert the power plug cord to the hot pot and plug to an electrical outlet. Press
the temperature control switch to 'II', indicator light will go on and hot pot will
start heating.
2.
Approximately 10 minutes later, the water will begin to boil, turn the
temperature control switch to 'O', hot pot will stop heating and indicator light will
go off. When no longer in use, always remember to unplug your appliance from
the power source.
Noodles
1.
Remove glass lid, add water lower than the 'MAX' level. Then cover with glass lid.
Insert the power plug cord to the hot pot and plug to an electrical outlet. Press
the temperature control switch to 'II', indicator light will go on and hot pot will
start heating.
2.
Approximately 10 minutes later, the water will begin to boil, remove the glass lid
place noodles into the pan and cover.
3.
When water returns to a boil add some seasoning and mix. Turn the temperature
control switch to 'O', hot pot will stop heating and indicator light will go off. When
no longer in use, always remember to unplug your appliance from the power
source.
Hot Pot
1.
Remove glass lid, add water but less than the 'MAX' level. Then cover with glass
lid. Insert the power plug cord to the hot pot and plug to an electrical outlet.
Press the temperature control switch to 'II', indicator light will go on and hot pot
will start heating.
2.
Approximately 10 minutes later, the water will begin to boil, place the food into
the pan and enjoy the food after it is fully cooked.
5
Publicidad
