Publicidad
Idiomas disponibles
Idiomas disponibles
30" ELECTRIC FRONT CONTROL FREESTANDING INSTALLATION INSTRUCTIONS
C. Level and Position Range - Level range by adjusting
the (4) leveling legs with a wrench. Note: Aminimum
clearance of 1/8" (3 mm) is required between the
bottom of the range and the leveling leg to allow
room for the bracket. Use a spirit level to check your
adjustments. Slide range back into position. Visually
check that rear leveling leg is inserted into and fully
secured by the Anti-Tip Bracket by removing lower
panel or storage drawer.
Range Side or
Cabinet Side
(0", 0.5 mm)
Fig. 7
4. Electrical Connection
Requirements
Avoid fire hazard or electrical shock.
Failure to follow this warning may casue serious injury,
fire, or death.
This appliance must be properly installed and grounded
by a qualified technician in accordance with the National
Electrical Code ANSI/NFPA No. 70 or Canadian Electrical
Code (CSA Standard (C22.1 Part 1) latest editions, and
Local Electrical Code requirements.
For personal safety, this appliance must be properly
grounded. For maximum safety, the power cord must be
plugged into an electrical outlet that is correct voltage, is
correctly polarized and properly grounded in accordance
with local codes.
It is the personal responsibilty of the consumer to have the
appropiate outlet with the correct, properly grounded wall
receptacle installed by a qualified electrician.
5. Models Including Power
Cord (Canada)
Plug the 4-prong range power cable into a properly
grounded, 240V wall outlet.
Power supply
cord with 4-prong
grounding plug
4
240V grounded
wall receptacle
Fig. 8
Publicidad
