Comet DTV100 1-30 OIL Libro De Uso Y Mantenimiento página 26

Before disconnecting the container disconnect the connection of the float (G) and pump power supply
(P)
1 - Disconnect the float (G) and pump connections
(P)
2 - Push the handle upwards and remove the barrel
3 - Empty the barrel
4 - Insert the attachment in "V" in its corresponding
seat and slide the bearing on the rail by pushing
down on the handle
5 - Connect the float (G) and the pump (P)
M
WARNING: TANK MUST BE EMPTIED EACH TIME THE CLEANING OPERATION IS ENDED; ALWAYS EMPTY
THE TANK IN A SAFE AND NOT-CLASSIFIED ZONE.
WARNING:BEFORE REPLACING THE COLLECTION CONTAINER MAKE SURE OF THE PRESENCE OF THE
CHIP SEPARATOR IN IT
WARNING: DO NOT HOLD YOUR HAND ON THE EDGE (B) OF THE COLLECTION DRUM WHILE LIFTING
15. EMPTYING THE MAIN COLLECTING BARREL
G
B
M
26
P