Fanimation AIREFLUSH LP6804 Serie Manual De Instrucciones página 9

How to Hang and Wire Your Ceiling Fan
NOTE: If you feel that you do not have enough electrical
wiring knowledge or experience, have your fan installed
by a licensed electrician.
7. Connect wires using connectors as shown in
Figure 8.
CAUTION: INCORRECT WIRE CONNECTION
COULD DAMAGE THIS RECEIVER.
AC POWER
9. After splicing and making the wire connections,
the wires should be spread apart and turned upward
with the grounded conductor, the equipment-grounding
conductor on one side of the ceiling bracket and the
ungrounded conductor on the other side of the ceiling
bracket. (Figure 9)
Check to see that all connections are tight,
including ground, and that no bare wire is
visible at the wire connectors. Do not operate
fan until the blades are in place. Noise and
motor damage could result.
The blades must be installed first before programming
is performed.
L
BLACK
WHITE
N
L1 RED
RF ANTENNA
WARNING
WARNING
GROUND
CEILING
BRACKET
MOTOR
RECEIVER
Figure 8
Green Wire
from Supply
(Ground)
Green Wire
from Ceiling Bracket
(Ground)
Yellow/Green Wire
from Receiver (2)
(Ground)
Green Wire
from Motor
(Ground)
9
(Continued)
RECEIVER HARDWARE USED:
Wire
Connectors
BLUE
BROWN
RED
GRAY
YELLOW
WHITE
White Wire
from Supply
Receiver
Figure 9
X 9
DC MOTOR
BLUE
LIGHT KIT
Listed Outlet Box
Black Wire
from Supply
Household
Supply
Red Wire
from Supply
Black Wire
from Receiver
White Wire
from Receiver