Ibiza sound DJM102-BT Manual De Instrucciones página 4

4. MIC BASS
This knob adjusts the low frequencies of the microphone.
5. MIC 1 LEVEL CONTROL
Controls the Mic1 input level.
6. MIC 2 LEVEL CONTROL
Controls the MIC2 input level.
7. MIC TALKOVER
When TALKOVER is selected, the volume of the input sources will decrease.
8. 10-BAND EQ
Allows to tailor the mixer output to your taste or environment. Each frequency range can be cut or boost
by up to 10dB.
9. DUAL VUMETER
Shows the left and right master levels.
10. USB DJ LAMP SOCKET
You can connect a 5V/500mA lamp to the mixing console.
11. MIC FREQUENCY KILL BUTTON
Allows you to kill the selected frequency range instantly to create interesting effects. The LED lights up
when the KILL function is activated.
12. GAIN CONTROL
Adjustment of the input gain.
13. CHANNEL INPUT SELECTOR
Select the input source that you want to play for each channel.
14. CHANNEL CUE
Monitor the selected audio input source.
15. CHANNEL LEVEL CONTROL
Lets you control the mixer's overall channel volume level.
16. CHANNEL ASSIGN SELECTOR
Lets you select the input source to be mixed by the crossfader control
17. CROSSFADER
Allows you to smoothly switch from Channel A to Channel B
18. ID3 DISPLAY SCREEN
The track title, time elapsed, track number, total tracks, repeat / random settings will be displayed here
19. USB/SD CARD FLASH DRIVE INPUT
Insert your USB flash drive into this slot. The unit will only read .mp3 file formats from the USB flash drive.
The maximum storage size of the USB flash drive cannot exceed 32GB.
A) USB / SD MODE SELECTOR
The unit is set to USB mode. Press this button if you wish to select the SD card player.
B) PLAY/PAUSE
Press this button to pause the signal from the USB flash drive. Press again to play. This button will only
work for USB flash drive signals.
C) SINGLE REPEAT/RANDOM/REPEAT ALL
There are 3 types of repetition that will be displayed on the screen. Press this button to select the type you
need.
D) Press shortly to go to previous track. Press for more than 3 seconds for fast backward in USB or SD
mode.
E)Press shortly to go to next track. Press for more than 3 seconds for fast forward in USB or SD mode.
20. HEADPHONE CUE/PGM CONTROL
Listen simultaneously or separately to the CUE material or the active program.
21. ECHO ON/OFF
22. ECHO VOLUME CONTROL
23. ECHO REPEAT CONTROL
Controls the time period during which the echo is repeated.
24. ECHO DELAY CONTROL
Controls the delay time of the echo.
25. EQUALIZER ON/OFF SWITCH
26. EFFECT SWITCH (SEND/RETURN)
If you connect a sound effect device such as reverb, sampler, etc. you can either play the signal from the
effect device or play another input through it.
27. HEADPHONE VOLUME CONTROL
4
MANUAL - DJM102-BT
© Copyright LOTRONIC 2023