7. PREVENTIVE MAINTENANCE
Maintenance and cleaning:
Before performing any cleaning or maintenance, unplug the equipment from the power grid;
After use, clean the equipment with a damp cloth (do not pour water on the equipment) and store it in a clean,
dry place protected from moisture and dust. Keep your equipment out of reach of children and people unfamiliar
with the use of the equipment.
Transportation:
Do not pull or carry the equipment by the electric cord or allow its contact with edges, sharp elements, rough
surfaces, oil or chemicals that may damage its fl exible and insulating properties;
Repairs:
If required to perform any repair, contact the nearest Schulz assistance. Original parts Schulz must be used. The
use of non-original parts results in warranty loss and may cause damage to the equipment or injury.
8. ENVIRONMENTAL GUIDELINES AND RECOMMENDATIONS
1. Wastewater Disposal
The presence of untreated wastewater into rivers, lakes or other water receiving bodies may adversely affect
marine life and water quality.
Schulz Compressores Ltda. recommends correct treatment of wastewater through processes that ensure envi-
ronmental protection and healthy quality of life in compliance with the regulatory requirements of the current
legislation.
2. Disposal of Solid Waste (large parts and product packaging)
The generation of solid waste is one aspect that must be considered by the user, in the use and the maintenance
of the equipment. The impacts caused in the environment may cause signifi cant changes in the soil quality, water
quality in surface and subsoil and the health of the population, through improper waste disposal (on streets,
water receiving bodies, landfi lls or plots, etc). Schulz Compressores Ltda. recommends the management of the
waste derived from the product from its generation, handling, and treatment to its fi nal disposal. A suitable
management should consider the following stages: quantifi cation, qualifi cation, classifi cation, source reduction,
collection and selective collection, recycling, storage, transportation treatment and fi nal destination. Waste
disposal should be done in compliance to regulatory requirements of current legislation.
9. WARRANTY
Schulz Compressores Ltda.,within the limits stated by this Term, assures the fi rst buyer the warranty against
workmanship defect for a period of one year (including the statutory warranty-period – fi rst 90 (ninety) days),
counted from the issue date of the invoice.
WARRANTY GENERAL CONDITIONS
A. Warranty service will only be performed upon presentation of the original invoice.
B. Any warranty service must be performed only by SCHULZ AUTHORIZED DEALER.
C. If the owner of this model (portable product) wishes to be visited at home, a visit fee may be charged by
38