Publicidad
Table 5. Security (continued)
Option
System Password
Internal HDD-0 Password
Strong Password
Password Configuration
Password Bypass
Password Change
Non-Admin Setup Changes
CPU XD Support
Admin Setup Lockout
Table 6. Secure Boot
Option
Secure Boot Enable
Expert Key Management
34
Configuración del sistema
Description
NOTE:
Successful password changes take effect immediately.
Default Setting: Not set
Allows you to set, change or delete the system password.
NOTE:
Successful password changes take effect immediately.
Default Setting: Not set
Allows you to set, change or delete the password on the system's internal hard-disk
drive.
NOTE:
Successful password changes take effect immediately.
Default Setting: Not set
Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
NOTE:
If Strong Password is enabled, Admin and System passwords must contain at
least one uppercase character, one lowercase character and be at least 8 characters
long.
Allows you to determine the minimum and maximum length of Administrator and System
passwords.
Allows you to enable or disable the permission to bypass the System and the Internal
HDD password, when they are set. The options are:
● Disabled
● Reboot bypass
Default Setting: Disabled
Allows you to enable the disable permission to the System and Hard Drive passwords
when the admin password is set.
Default Setting: Allow Non-Admin Password Changes is selected.
Allows you to determine whether changes to the setup options are allowed when an
Administrator Password is set. If disabled the setup options are locked by the admin
password.
Allows you to enable the Execute Disable mode of the processor.
Enable CPU XD Support (default)
Allows you to prevent users from entering Setup when an Administrator password is set.
Default Setting: Enable Admin Setup Lockout is not selected.
Description
This option enables or disables the Secure Boot Feature.
● Disabled
● Enabled
Default Setting: The option is disabled.
Allows you to manipulate the security key databases only if the system is in Custom
Mode. The Enable Custom Mode option is disabled by default. The options are:
● PK
● KEK
● db
Publicidad
