About Updating - Work Pro W LED Player 100 Instrucciones De Usuario

EN
Operation Guide
5.3.Configuring a SHOW
6. Click "EditShow" icon to edit and configure each of the 8 shows.
6.1 Select the Show to configure by using the drop down menu in the
top right corner of the screen. Set the base address of LED Player 100
in the DMX address field. Set fade time in the "Fade Time" field.
6.2 Assign scenes to the selected show using the ">", "Insert" and "<"
icons.
6.3 Click "Download to keypad" icon to save a configured show to the
LED Player 100.

6. About Updating

1. Obtain a file named "LightOpPro.scn" from WORK .
2. Power off LED Player 100. Then hold on pressing "Fn/Record" button
and "Mode/Lib" button and power on the unit.
3. Connect LED Player 100 to your computer with USB cable via USB port.
4. Run the program "ART-16.exe". Then use EditShow function to
download the file "LightOpPro.scn".
5. Unplug the USB cable after completing download. Then, power off
the unit.
6. Power on the unit. The unit completes updating now.
LED Player 100 User Manual/Instrucciones de Usuario
PAG. 19