Zizito BARRON Manual De Instrucciones página 14

Assembly on the chassis
Align the bassinet with the
anchors on the side of the
chassis and push them together
until they install securely. You
should hear a clear "click".
Lift up the release button and
remove the bassinet when the
baby is not inside.
Car seat assembly
Press the button on the two sides
of the handle at the same time to
adjust the handle position. Open
the hood.
Insert the car seat adapter onto
Car seat facing direction
Press the release button
located on each side of the car
seat at the same time, lift to
remove car seat from the frame.
The car seat can be installed
onto the chassis on both
forward facing and backward
facing direction.
14
the slot on each side of the
car seat according to the L/R
direction. You should hear a clear
"click".
Align the car seat with the
FORWARD FACING
REMOVE
CLICK
REMOVE
anchors on the side of the
chassis and push them together
until they install securely.
You should hear a clear "click".
BACKWARD FACING