Descargar Imprimir esta página

Franke FCBI 926 Manual De Uso página 12

Ocultar thumbs Ver también para FCBI 926:

Publicidad

5. REMOTE CONTROL
The remote control is powered by a CR2032
type 3 V battery (not included).
• Do not place the remote control near
heat sources.
• Do not discard the batteries with normal
containers.
Motor On/Off.
-
-
Lights On / Off.
Press and hold for 2sec to turn the Hood
lights On/Off at reduced intensity.
Activates/Deactivates Intensive operation
Brief pressure: Activates/Deactivates the
Delay function: automatic switch-off with a
30' delay. The display shows the operating
speed and the dot at the bottom right
Press for 2 seconds: Activates/Deactivates
the 24h function: turns the suction motor
on at speed one and effects one 10 minute
extraction every hour. The display shows
the number 24 and the dot at the bottom
Increases the working speed each time it
is pressed.
Decreases the working speed each time it
is pressed.
12
6. LIGHTING
• Lamps in risk group 1 under
IEC/EN62471 at a distance of
20cm and in exempt from risk
group under IEC/EN62471 at
a distance of 30cm.
• For replacement contact technical support
("To purchase contact technical support").

Publicidad

loading