Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL SAFETY
WARNINGS FOR
YOUR LASER
MEASURING
TOOL
WARNING: Read all
safety warnings and
all instructions. Failure to follow
the warnings and instructions may
result in serious injury.
Save all warnings and
instructions for future
reference.
These lasers do not normally present an
optical hazard although staring at the
beam may cause flash blindness.
Do not stare directly at the laser beam. A
hazard may exist if you deliberately stare
into the beam, please observe all safety
rules as follows:
1. Laser radiation, do not stare into beam.
2. The laser shall be used and maintained
in accordance with the manufacturer's
instructions.
3. Never aim the beam at any person or
an object other than the work piece.
4. The laser beam shall not be deliberately
aimed at another person and shall be
prevented from being directed towards
the eye of a person for longer than 0.25
seconds area.
5. Always ensure the laser beam is
aimed at a sturdy work piece without
reflective surfaces, e.g. wood or rough-
18
coated surfaces are acceptable. Bright
shiny reflective sheet steel or similar is
not suitable for laser applications as the
reflective surface may direct the laser
beam back at the operator.
6. Do not change the laser device with
a different type. The manufacturer or
an authorized agent must carry out
repairs.
7. CAUTION: Use of controls or
adjustments other than those specified
herein may result in hazardous
radiation exposure.
8. Do not use this product in flammable,
explosive, corrosive environments or
near medical equipment or aircraft.
BATTERY
WARNINGS
WARNING
1. Use the recommended type of dry
battery, different type of batteries may
cause damage.
2. Do not expose the battery to an
overheating environment, such as
sunlight or fire, which may explode,
cause fire or personal injury.
3. Do not short-circuit or disassemble the
battery, which may explode, cause fire
or personal injury.
4. The battery may leak if the device is
not used properly. In case of battery
leakage, carefully remove the liquid
with a cloth. Once contact battery
liquid, wash with running water
EN
Publicidad
