Operation Guide; Dmx Address Mode - Work Pro W UNIDIM 1 Manual De Uso

2. Operation Guide

General
Select the appropriate power resource and plug in. The rated voltage of UNI
DIM is only 230V. With the power failure memory function, this unit can recover
the last function state automatically. If the frequency of power is not stable, the
Segment Display will show "AC-0", please wait until the power is stable.
This unit serves as a dimmer pack or a switch pack, depending on operating
mode you've selected.
Note:

2.1 DMX Address Mode

DMX Address Dim Preset
Dim/Switch Dim Limit
DMX
MENU
2. Each tap of the Up or Down button will change
the DMX address once. Pressing and holding
down will change the DMX address quickly.
Once the DMX address is selected, it will be
recorded into the unit automatically.
NOTE:
During DMX addressing, output is disabled.
User Manual / Manual
1. The Segment Display shows the DMX address
of last change when powering this unit.
If you've selected DMX address 123 for the last
time, then the Segment Display will read 123.
Page/Página
DMX Address Dim Preset
Dim/Switch Dim Limit
DMX
MENU
5