Dim/Switch Pack Mode - Work Pro W UNIDIM 1 Manual De Uso

2. Operation Guide

2.2 Dim/Switch Pack Mode

DMX Address Dim Preset
Dim/Switch Dim Limit
---
DMX
MENU
2. You can change Dim/Switch Mode by tapping the
Up or Down button. And the segment display will
show "S---", it means the Switch Pack Mode is
activated now.
DMX Address Dim Preset
Dim/Switch Dim Limit
DMX
MENU
In the Switch Off Mode, output is turned off and
the fixture is controlled by DMX signal. When DMX
level is less than 40%, the fixture goes out; when
DMX level exceeds 40%, the fixture lights. You can
adjust the level by adjusting the Local Dim Knob.
User Manual / Manual
1. When the desired DMX addresses are complete,
you can enter the next mode by pressing Menu
button. The segment display will show " d--- ", it
means the Dim Pack Mode is activated now.
3. Press Menu button to confirm and enter Switch
Pack Mode consisting of Switch On(S-on) and
Switch Off(S-of).
In the Switch On Mode, output is turned on and
the fixture lights regardless of DMX signal.
DMX Address
DMX
MENU
LOCAL DIM LOCAL DIM
Min Min
Page/Página 6
Dim Preset
Dim/Switch Dim Limit
---
(HTP) (HTP)
Max Max