Publicidad
Idiomas disponibles
Idiomas disponibles
1/2 Ton (1,000 Lbs.) Engine Stand (1586260)
USAGE INSTRUCTIONS:
1. Before proceeding with engine attachment be certain that you have the properly sized
and rated bolts to mount the engine to engine stand . These bolts must be purchased
separately from your local hardware store. USE ONLY GRADE 8 BOLTS. See drawing
below for the proper head markings of a grade 8 bolt. For metric use, use 8.8 or higher
rated bolts. These bolts will be embossed with 8.8 on the bolt head. Also choose a bolt
length that allows 1/2" or more of threaded bolt insertion into the engine.
2. Remove the head assembly of the engine stand from its base and attach directly to the
engine. This is easier than attaching the engine to stand head while it is on the engine
stand base. Try to always mount the engine to the stand at the engine's highest point
above the crank shaft. This will allow the closest center of gravity for rotating the engine.
3. Before placing the head (after bolting engine to stand's head) into the stand's base, be
certain that all four mounting bolts are securely tightened to the engine. Also, be certain
all assembly points mentioned in the assembly instructions are properly tightened. Before
proceeding be sure you have read and followed all caution statements mentioned earlier
in the instruction manual.
4. Slowly place the stand head into the base of the engine stand. Replace the lock pin into
the base to secure load. Always watch for any weight imbalance or ground setting when
re-assembling. Also, be certain that the ground is level, smooth, and hard. The floor
should be free of cracks and obstacles that could obstruct movement. Any imbalance or
instability can result in loss of load and personal injury.
5. Important - Never perform any work or inspection from underneath engine while it is
mounted on the stand. The rotation feature should be used to access the angine from all
sides.
8.8
4
1/2 Ton (1,000 Lbs.) Engine Stand (1586260)
One Year Warranty
Every MOTORHEAD Product is inspected before leaving the factory. This product is warrant-
ed to be free ofdefects in material and workmanship. Motorhead, The Licensor of
MOTORHEAD brand, authorizes the retail store to replace free of charge, with the same or
like item of equal value any item found to have defects in materials or workmanship during
the 1 year of customer ownership from date of purchase with proof of purchase. (Proof of
purchase must be either original or clear copy of your store receipt.) Before returning to the
store, please call toll free customer support at 1-866-608-5212 Monday thru Friday between
the hours of 8:00 AM and 8:00 PM EST for assistance and troubleshooting the issue with
your product. Replacement parts for your product can be obtained thru the customer
support group. This warranty gives you specific legal rights, and you may also have other
rights which may vary from state to state. Motorhead, Motorhead Emblem and the Motor-
head related graphics are Motorhead Trademarks used under license to and distributed by
Horizon Marketing Group, LLC, 4198 Industry Way, Flowery Branch, GA 30542 U.S.A. (Made
in China.)
For Replacement Parts and Technical Assistance:
Please call toll free 1-866-608-5212 Monday thru Friday between the hours of 8:00 AM and
8:00 PM EST. Replacement Parts request can also be submitted via the web, 24 hours daily
at www.motorheadtools.com. In all correspondence, please include model #, part #, part
description and quantity required. Name, shipping address and day time telephone number,
including area code, are required to process your parts shipment request. tt
5
Publicidad
