Publicidad
Idiomas disponibles
Idiomas disponibles
THC
• Unauthorized equipment modifications and technical changes made by the
customer.
• Use by unauthorized personnel.
• Use of replacement parts not authorized by the manufacturer.
• The manufacturer reserves the right to make technical modifications as a result
of improvements made to the equipment and new developments.
Safety Instructions and General Warnings
WARNING
• Do not store in this device explosive gases such as aerosols containing
inflammable propellants.
• Do not damage the refrigerant circuit!
• Leave the equipment's vents unobstructed.
• Do not use mechanical devices in order to accelerate the defrosting other than
the ones recommended by the manufacturer.
• Do not use electrical appliances in the compartment designated for food.
• Do not use electrical appliances in the compartment designated for food
preservation.
• The values contained on the rating plate were measured in the climatic class
as indicated:
• For equipment with climate class T, the ambient temperature values range from
16 ºC to 43 ºC.
• Do not use power strips or extension cords as they present a fire or electric
shock hazard.
• Before any cleaning or maintenance operation disconnect the equipment from
the power source by removing the plug from the outlet!
• If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
• Do not, under any circumstances, connect damaged equipment to the electric
circuit, as doing so presents risk of electric shock or refrigerant leaks!
• Do not make technical changes to the equipment. There is the risk of injury or
electric shock!
• Check if the power source's voltage and
respective
recommendations in the equipment's rating
plate found on the back (Fig. 4).
• To unplug the equipment, pull the plug and not
the cord. (Fig. 1)
• Do not load the equipment with products until it
reaches the desired temperature.
• Check the equipment temperatures regularly.
• Wait until the equipment reaches the required temperature. Keep products cold
before loading the equipment.
• The maximum level of sound pressure emission is below 70 dB(A).
frequency
correspond
English
to
the
Fig. 9 - Never pull the cord
19
Publicidad
