Publicidad
Idiomas disponibles
Idiomas disponibles
THC
5. Installation
NOTES:
• For the equipment's proper installation,
check its placement on a levelled
surface away from sources of heat
and/or direct solar radiation and doors,
windows, fans, and vents.
• Advertising labels may only be placed
in the form of thin film. Do not affix thick
insulation materials on the outer walls.
• Make sure that air circulates freely
around the equipment complying with
the minimum distances illustrated in
Fig. 4.
6. Electrical Connection
NOTES:
• Connect the equipment to an outlet that is properly grounded. This connection
is mandatory.
• Check if the power source's voltage and respective frequency correspond to
the recommendations in the equipment's rating plate found on the back (Fig.
2).
• The maximum impedance of the equipment's power supply network should be
0.33 ohms.
• Work on the electrical system, repair or replacement, must be carried out by
authorized technicians. To request assistance, contact the supplier's customer
service.
• Do not use any inappropriate adapters, power strips or extension cords. They
may cause overheating and burn. The manufacturer will decline any liability for
damages caused to people or objects resulting from non-compliance with this
standard.
7. Operation
This equipment is projected to operate at a certain room temperature and relative
humidity found in the climate classification indicated on the rating plate.
WARNING
English
Fig. 12 - Minimum Distances for
Installation
24
Publicidad
