Bahco BH15000B Manual De Instrucciones página 7

Original Instructions
Warnings and Safety Instructions
DANGER
• Read, study, understand and follow all instructions before use.
• Consult the vehicle manufacturer's manual for instructions.
WARNING
• Always work in accordance with the instruction manual.
• Failure to heed these warnings may result in serious or fatal personal injury and/or property damage.
• SNA Europe SAS disclaims any liability for loss, damage or operating problems resulting from disregarding these
operating and maintenance instructions.
• SNA Europe SAS is not responsible for any negligence in tool use and/or repair, inadequate care, or abnormal
use conditions.
• Follow the instructions for proper use, safety, maintenance and servicing stated by SNA Europe SAS.
• Users must be qualified by having received operating instructions and technical training before using this device.
• Users are required to comply with the Construction and Safety Regulations.
• Users must be familiar with the applicable occupational safety and accident prevention regulations.
• Do not exceed the rated capacity.
• Do not use the device if it is not in safe condition.
• Always conduct a pre-operational check of the equipment and inspect the device before each use.
• Do not use the device if any component is cracked, broken, bent, shows sign of damage, or leaks hydraulic fluid.
• Do not use the device if it has loose or missing hardware or components, or if it is modified in any way.
• Technical alterations, modifications and/or deactivation of the lift device are not allowed.
• Use only original accessories and spare parts.
• Always store and use the device in a well-protected area where it will not be exposed to inclement weather,
corrosive vapours, abrasive dust, or any other harmful elements.
• Always store the device with the pressure relief valve open.
• Do not use any materials that may serve as risers, spacers or extenders on this device, unless approved or
supplied by the manufacturer.
• The service life of this device depends on various factors, such as regular maintenance, lubrication, proper use,
cleanliness, etc.
• Use only on a firm, smooth, flat, uniform and hard level surface free of obstructions.
• The user manual cannot cover all risks. The end user must be careful and consider the residual risk in use.
• The illustrations and pictures may differ from the supplied item, but the functions and required procedures remain
the same.
• Keep these instructions in a safe place.
Technical Data
P/N: BH15000B
Type: Hydraulic Trolley Jack
Conforms to: EN 1494:2000+A1:2008
Maximum capacity: 5000 kg
Maximum lifting height: 685 mm
Minimum entry height: 150 mm
Equipped with a safety pressure valve and descent
speed control system
Working temperature range: -20 ºC / +50 º
temperature range: 0 ºC / +40 ºC
Net weight: 89.5 kg
P/N: BH110000B
Type: Hydraulic Trolley Jack
Conforms to: EN 1494:2000+A1:2008
Maximum capacity: 10000 kg
Maximum lifting height: 685 mm
Minimum entry height: 160 mm
Equipped with a safety pressure valve and descent
speed control system
Working temperature range: -20 ºC / +50 ºC
temperature range: 0 ºC / +40 ºC
Net weight: 135.5 kg
EN
7