LEGRAND 0 697 40 Manual De Instrucciones página 5

360° Waterproof movement detector
0 697 40/80
Principle
This device is used to automatically control
a light source when a movement occurs
within its surveillance zone.
Permissible power

25°C
230 V±
50 Hz
2000 W
 Incandescent lamps
 230 V halogen lamps
 Ø 26 mm fluorescent tubes
Detection zone
Technical characteristics
• Power supply : 230 V~ - 50/60 Hz
• Output via N/O contact connected to the live
• Lighting duration can be adjusted from 12 s to 16 min after the last movement
detected
• Movement detection depending on lighting level, threshold can be adjusted from
10 to 4000 lux
• Sensitivity adjustment : allows to determine the precision of sensor action
• Operating temperature : 0°C to +55°C (sensor has low sensitivity working at
ambient temperature above 35°C)
• Storage : – 30°C to + 80°C
• Terminal capacity : 2 x 1.5 mm
• Dimensions : 90 X 91 mm - Diameter 91 mm
• Min. installation height : 1.70 m
 
Ø 26 mm
2000 W 1000 VA
 Compact fluorescent lamps with separate electronic ballast
 Compact fluorescent lamps with integrated electronic ballast
8 m
or 1 x 2.5 mm
2
 
1000 VA 1000 VA
 Halogen lamps with ferromagnetic transformer
 Halogen lamps with electronic transformer
15°
45°
45°
5
2
 
2000 VA 2000 VA
12 m