Publicidad
Idiomas disponibles
Idiomas disponibles
Adjustments and start-up
1) Setting the clock
1. Select "clock".
2. Enter the desired time using the numeric keypad. First select the hours when the digits are
flashing and then the minutes.
Example: If you wish to enter the time "10:00", enter the numbers in order: "1,0,0,0,0".
3. Select "clock" to set the time.
4. If the values entered are not within the range of 1:00 - 12:59, the clock setting will be invalid.
Note: If during the clock setting process the "stop/cancel" key is selected or no selection is
made for one minute, the time will remain at the previous setting automatically.
2) Kitchen timer
1. Select "timer", the display will show "00:00" flashing.
2. Enter the desired time using the numeric keypad. (The maximum time allowed is 99 minutes and
99 seconds).
3. Select "start/+30 sec" to confirm.
4. When the countdown is completed, the oven will beep 5 times.
When the timer is set, the display will show the remaining time.
Note: The timer only functions to count the time. You cannot select any cooking programs while
the timer is running.
3) Microwave cooking
1. Select "time cook", the display will show "00:00" .
2. Enter the desired time using the numeric keypad. (The maximum time allowed is 99 minutes and
99 seconds).
3. Select "power" , the display will show "PL10" .The automatic setting is 100% power, use the
numeric control panel to change the power level.
4. Select "start/+30 sec" to confirm and start cooking.
Example: If you want to cook for 15 minutes at 50% power,
1.Select "time c ook
"
2.Enter the
numbers in order "1,5,0,0,",
3.Select "power" and enter the number 5 for 50%
4.Power and finally select "start/+30 sec".
NOTES:
1) If during the setting process the "Stop/Cancel" button is pressed or no change is made for 1
minute, the oven will return to the previous setting automatically.
2) If you select the power level "PL0", the oven will run on air only and will not operate on air.
You can use this power to remove odors from the oven.
3) During operation, you can change the power level when necessary, selecting "power" will
display the current power level flashing for 3 seconds, during this time you can press the number
key to change the power level. The oven will operate at the new selected power for the remaining
cooking time.
English-8
Publicidad
