Publicidad
Idiomas disponibles
Idiomas disponibles
4) Cooking with microwave in 2 steps
1. Select "
time cook
", the display will show "00:00" .
2. Enter the desired time using the numeric keypad. (The maximum time allowed is 99 minutes and 99 seconds).
Select "power", the display will show "PL10". The automatic setting is 100% power, use the numeric keypad to change the
power level.
4. Select time cook" again, the display will show "00:00".
5. Enter the desired time using the numeric keypad. (The maximum time allowed is 99 minutes and 99 seconds).
6. Select "power", the display will show "PL10". The automatic setting is 100% power, use the numeric keypad to change the
power level.
7. Select "start/+30 sec" to confirm and start cooking.
5) Quick start
1. In standby mode, the quick start with 100% power can be started by simply selecting a number from 1-6. Select "start/+30
sec" to increase the cooking time by 30 seconds.
2. In standby mode, the quick start with 100% power for 30 seconds can be started by simply selecting "start/+30 sec". You
can press as many times as you wish to increase the cooking time by 30 seconds each time.
(The maximum time allowed is 99 minutes and 99 seconds).
Note: you can add 30 seconds to the cooking time by selecting "start/+30 sec" during any microwave cooking except during
"defrost by weight".
6) Defrosting by weight
1. Select "defrost by weight", the display will show "dEF1".
2. Use the numeric keypad to enter the weight to defrost. The value must be between 100 to 2000g.
3. If you do not enter a value within the allowable range, cooking will not start until an allowable value is entered.
4. Select "start/+30" sec to confirm and start defrosting.
7) Defrosting by time
1. Select "defrost by time", the display will show "dEF2".
2. Use the numeric keypad to enter the time to defrost. The value must be between 00:01 to 99:99.
3. If you do not enter a value within the allowable range, cooking will not start until an allowable value is entered.
4. The automatic setting is 30% power, select "power" and use the numeric control panel to modify the power level.
5. Select "start/+30 sec" to confirm and start defrosting.
8) Popcorn
1. Select "popcorn" repeatedly until one of the following options is selected:
50? ? / 100
2. Select "start/+30 sec" to confirm and start the program.
SEE: IMPORTANT INFORMATION REGARDING OVERHEAT SAFETY
English-9
Publicidad
