TRAPP Master 500L Manual De Instrucciones página 23

www.trapp.com.br
Warning!
Under no circumstances should the

trimmer be used without the protection
shield (see Figures 1 and 2), under the risk
of power loss and motor burning, besides
ensuring the safety of the operator during
handling.
The protection shield is responsible for

delimiting the action area of the nylon,
according to the capacity of the motor.
Thus, without it, the nylon advances and
its length increases.
At every "extra" nylon centimeter, the

motor loses 300 rpm of power in rotation,
generating an overload and causing the
unit burn.
Nylon cutter
Fig. 1
Nylon cutter
Fig. 2
Use and Operation Instructions
Image merely illustrative
Image merely illustrative
Warning!
All and every maintenance or cleaning
shall be done with the equipment turned
off and unplugged.
Installation of the protection device
Before switching on and using the lawn

mower/trimmer, install the protection device.
TRAPP lawn mowers/trimmers are already

assembled when delivered with the exception
of the protection device. It is conditioned
together with the equipment in the same
package. To assemble it, turn the lawn mower/
trimmer upwards (Fig. 3).
Place the protection device as per drawing,

and fit it in lock (3) (Fig. 4). Press it to the body
(4), put screws (2) in position and tighten them
(Fig. 3).
If you use the equipment without the

protection device, you will not be entitled to
the warranty.
1 Saia de proteção
1
Protection device
2 Parafusos
2 Screws
3 Trava
3
Lock
4 Corpo
4 Body
Image merely illustrative
Fig. 3
Lock
3 3 Trava
Image merely
illustrative
Fig. 4
23