Descargar Imprimir esta página

Denver CRP - 913 Manual De Instrucciones página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 29
SLEEP
1. Set the ON/OFF/AUTO switch (1) to'OFF' or 'AUTO'.
2. Press the Sleep Set button (7) and Minute Set button (10) together.
The sleep time will be displayed and count down from 59 minutes to
zero. Release the buttons when the required sleep time is dispalyed.
3. The radio will now operate until the sleep time has elapsed or may be
switched off by pressing the Snooze/Sleep Off button (4).
RADIO
The AM bands use an internal directional serial. Rotate the radio for best
reception.
For best FM reception ensure that the FM cord antenna is completely
uncoiled and extended. Rear side of cabinet.
1. Set the ON/OFF/AUTO switch (1) to 'ON' position
2. Set the Wave band switch (12) to the required wave band.
3. Adjust the Tuning Control (13) to select the desired station.
4. Adjust the Volume Control (11) is required.
5. To turn off the radio, set the ON/OFF/AUTO swtich (1) to 'OFF' position.
If the radio does not switch off this may be caused by inadvertent
operation of the Sleep Set button (7), to cancel this press the Snooze/
Sleep Off button (4) once.
SPECIFICATIONS
Frequency Range
Output Power
Speaker Impedance
Battery Backup
Power Source
Dripping warning :
Ventilation warning : The normal ventilation of the product shall not be
: AM 530 – 1600 kHz
FM 88 – 108 MHz
: 300 mW
: 8 ohm
: 9V battery (for clock)
: AC230V ~ 50 Hz, 5 Watts
The product shall not be exposed to dripping or
splashing and that no objects filled with liquids, such
as vases, shall placed on the product.
impeded for intended use.

Publicidad

loading