KEKAI KT0640 Manual página 6

INSTRUCTION MANUAL
Assembly Instruction:
DO NOT over tighten the hardware.
Step 1) Attach Legs (E) to
Bottom Ring-Small(D2)by using
Bolts( I ) and Nuts(J),hand
tightened,do not fully tightened
first,follow the same step for the
Upper Ring-Large(D1).Fully
tightened all bolts with provided
Allen Wrench (G).(See Fig 1)
Step 2) Use the nut on the
handle Lid Ring (H) to the Mesh
Lid (A).
Step 3) Place the Fire Bowl (C) on
the assembled base and put the
Grate (B) in the fire bowl.Attach
the assembled Mesh Lid on the
Fire Bowl.
WARNING!
• The use of alcohol, prescription or non-prescription drugs may impair
the ability to properly assemble or safely operate this fire pit.
• When using this fire pit, exercise the same precautions you would
with any open fire.
• Do not use this fire pit for indoor heating. Toxic carbon monoxide
fumes can accumulate and cause asphyxiation or death.
MADE IN CHINA