Furrion FEHS28CAA Manual De Instrucciones página 24

TV Settings
Channel Settings
1. Press MENU button on the remote control
to enter the main menu.
2. Use / buttons to select Channel.
3. Use / buttons to highlight the item
you would like to reset, then press
buttons to select the settings.
4. Press MENU to return to the previous
menu or press EXIT at any time to exit the
setting.
● Air/Cable
Press / buttons to highlight Air/
Cable, then use
Air or Cable based on your antenna
connection.
Select Cable if you subscribe to a pay
television service without a set top box.
Select Air when TV is connected to an
indoor/outdoor antenna.
● Auto Scan
Press / buttons to highlight Auto
Scan. Press
to enter sub-menu.
In Cable mode, press
highlight Cable System, and press
buttons to select STD/ IRC/HRC/Auto.
Press / buttons to highlight Start
to Scan, then press / OK to start Auto
Scan.
In Air mode, press
Scan directly.
24
/
/ buttons to select
/ buttons to
/
to highlight Start to
CCD-0005560 Rev. 12.30.22
Press / OK to start
It may take several minutes to complete
Auto Scan.
NOTE: For Cable or Satellite users with a
set-top box, there is no need to run channel
Auto Scan. Connect your cable or satellite set
top box to one of the available inputs on the
TV for viewing.
● Favorite
Press / buttons to highlight Favorite
then press to enter sub-menu.
Press / buttons to select channels
to be added or deleted from your favorite
list. Press OK to add or delete a channel.
A checkmark will appear to indicate that a
channel has been added to favorite list.
Auto Scan.